What are you looking for?

Type: 2200

  • Goldring 2200 Moving Iron cartridge

All Goldring 2000 series cartridges feature Moving Iron technology. This lends them the high levels of detail associated with more expensive moving coil designs whilst retaining the convenience of a replaceable stylus and high output associated with moving magnet types. The cartridge employs a fixed samarium cobolt magnet and high output coil combination so that a very light iron/nickel cantilever end-piece can be used instead of the much heavier permanent magnet used in conventional designs. This reduces the moving mass allowing the stylus to trace the record groove more faithfully. Because of their high output, Goldring 2000 series cartridges should be used with the standard moving magnet phono input of an integrated amplifier.

The 2200 features a bonded elliptical diamond stylus and alumite cantilever which offers higher definition and improved transient response when compared to a conventional cantilever and spherical stylus.

  • Channel Balance: 2dB @ 1kHz
  • Channel Separation: >20dB @ 1kHz
  • Sensitivity: 6.5mV±1.5dB, 1kHz @ 5 cm/sec
  • Static Compliance: 20x
  • Vertical Tracking Angle: 24°
  • Radius: Elliptical .0007"x.0003"
  • Stylus Type: Replaceable
  • Load Resistance: 47,000 Ohm
  • Load Capacitance: 100-200pF
  • Internal Inductance: 680 mH
  • Internal Resistance: 550 Ohm
  • Cartridge Weight: 7.2g
  • Fixing Centre: 0.5” (12.7mm)
  • Tracking Weight: 1.5-2.0g (1.7g nom.)